Panamax M5400-PM A/V Component surge protector

  • 11 outlet component home theater surge protector
  • VOLTAGE REGULATION

    Improve system performance and prolong equipment life by providing a consistent level of optimal power to your equipment.

    IMPROVES PICTURE AND SOUND QUALITY

    Level 4+ Power Cleaning and Filtration eliminates common symptoms of contaminated power (including loss of detail, pops, hisses, hums and visual artifacts) and allows your A/V equipment to perform up to its full capability.

    MONITORS INCOMING LINE VOLTAGE AND PROVIDES A VISUAL INDICATION OF POWER LEVEL

    Panamax’s patent pending AVM™ circuitry continuously monitors the incoming power as displayed on the digital voltmeter. In case of an undervoltage or an overvoltage, a flashing lightning bolt will be displayed in red in the voltmeter, and power to the connected equipment is automatically turned off if either of these conditions is detected. When voltage returns to a safe level, power to the equipment is automatically reconnected.

    REDUCES CROSS-CONTAMINATION BETWEEN COMPONENTS

    The M5400-PM is designed to provide noise isolation between 5 isolated outlet banks including 2 high current outlets so that any noise created by an A/V component can not contaminate the power going to equipment plugged into another outlet bank.

  • General

    Weight 20 lbs.
    Rack Ears Included
    Dimensions 17 in. W x 12.75 in. D x 3.5 in H, (4.1 in. Including feet)

    AC Power

    UL1449 Suppression Rating 330V
    Thermal Fusing Yes
    Protection Modes L-N, L-G, N-G
    Power Cord 10 ft detachable
    Peak Impulse Current 72,000 A
    Maximum Current Rating 15 A
    Line Voltage 120V, 60Hz
    Initial Clamping Level 200V
    Energy Dissipation 2125 Joules
    Catastrophic Surge Circuit Yes
    Auto-Resetting Under-voltage shutoff 86V ± 6V
    Auto-Resetting Over-voltage shutoff 142 VAC ± 8 VAC

    EMI/RFI Noise Filtration

    Banks 1, 2, 3, 4 80 db, 100 KHz − 2 MHz
    Bank 5, High Current Outlets 60 db, 100 KHz − 2 MHz

    Voltage Regulation (Banks 1-4)

    Power / Current 1500 VA / 12A
    Output Voltage Range 120 VAC ± 6 VAC
    Input Voltage Range 100-136 VAC
    Buck Stage reduces voltage in the 125-136 V range
    Boost Stage 2 boosts voltage in the 100-109 V range
    Boost Stage 1 boosts voltage in the 109-119 V range

    DC Trigger Input

    Voltage and Polarity 3 - 24V DC, Bidirectional
    Jacks 3.5mm (1/8" mono mini-plug)
    Current Requirement 4.6 mA @3V, 58 mA @24V

    DC Trigger Output

    Positive = Tip, Negative = Ring  
    Pass through no delay

    LAN Circuits

    Wires Protected 8-Wires
    Connectors RJ-45
    Compatibility 10/100bT
    Clamping Level 52V

    USB Circuit

    Power Delivery 500 mA @ 5VDC
    Jacks USB-A

    Telco Protection

    Wires Protected 2-Wire, Pins 4 & 5
    Suppression Modes Metallic & Longitudinal
    Fuseless/Auto-resetting Yes
    Connectors RJ-11
    Clamping Level 260V
    Capacitance 30pf (approx.)

    Universal Coax Protection

    Shielded Yes
    Insertion Loss < 0.5 dB
    HD 1080 i/p Ready Yes
    Frequency Range 0 MHz - 2.2 GHz
    Connections Female "F", Gold Plated
    Clamping Level 75V
    Bidirectional Yes

Type: Surge Protector

Brand: Panamax


Pin It Fancy

Related Items