For screen reader problems with this website, please call210-828-32372 1 0 8 2 8 3 2 3 7Standard carrier rates apply to texts.
The Deep Collection of subwoofers uses high-quality high-efficiency amplifiers. Standard controls include crossover, phase, volume, and auto-on.
Use this knob to set the highest bass frequency the subwoofer will play, from 50 to 150 Hz. If you’re using an AV receiver or surround-sound processor, set this knob at 150 and use the crossover built into the receiver or processor. If the subwoofer is installed in a stereo system, set this knob as close as possible to the lowest rated bass extension of the main left and right speakers.
Use this knob to adjust the phase of the subwoofer relative to the main speakers. This will help achieve a smoother blend of the sound of the subwoofer and the main speakers. To adjust it, sit in the chair or couch where you usually listen, and play some bass-heavy music with the phase knob set to 0. Now play the same music with the knob set to 180. If you hear a difference, experiment with different settings until the bass sounds smoothest from your chair.
This knob adjusts the subwoofer’s volume. Turn it clockwise for full volume. Note that the subwoofer level control in an AV receiver will also affect how loud the subwoofer plays. With most AV receivers, setting this knob at about halfway up (the 12 o’clock position) will provide a volume level that allows the subwoofer’s level to be matched with that of the main speakers.
This switch functions only when the power switch is set to “on.” When this switch and the power switch are both set to “on,” the subwoofer’s power will always be on. When this switch is set to “auto,” the subwoofer’s power will come on automatically when it senses an incoming audio signal. If there is no signal for 15-18 minutes, the subwoofer will automatically shut off.
Connect the subwoofer to a receiver or preamp using an RCA interconnect cable, not included. The sub can either be connected to a dedicated LFE output or subwoofer output using a single mono cable or, by using a “Y” adapter, to a stereo, adjustable line level output. A fixed line level output is not appropriate as the subwoofer level will not change to follow the adjustments in system output level.
|Speaker Type||Powered Subwoofers|
|Amplifier Output (Watts)||600|
|Color Finish Name||Black|